Description
Application
Compatible for Dodge Ram 1500 2500 3500 5.7L 6.4L HEMI (8 Speed Transmission) 2009-2019
Compatible for Dodge Charger, compatible for Dodge Challenger, compatible for Chrysler 300, for 6.4L SRT8
Specification
Hose: Heat / Oil / Petroleum / Goodyear HP 1/2 inch Hose
Filter: Unique Three Chamber Design
Catch Can Dimensions: 5 1/2" Tall x 2 1/2" Wide
Items Included:
-Billet catch can
-Allen wrench
-Z bracket
-1/2 inch Nickel fittings
-1/2 inch Goodyear HP Hose
Condition: 100% Brand New
Notice
-Please allow 2-3mm Measurement error
-If there are any questions, please feel free to contact us.
Installation Instructions
Step 1-Remove the factory or aftermarket air intake tube. (Removing 2 hose clamps and 1 sensor plug)
Step 2-Remove the factory engine cover by lifting the front and pulling towards you. (Hose Cut-Out n Rear Alignment Pins on Intake Cover)
Step 3-Remove the PCV Hose from the Throttle Body and Top of Intake Manifold (Remove the 2 rubber ends on each side for a much cleaner install than the 2 Adapter Barbed Fittings)
Step 4-Install compatible for Dodge Ram Catch Can in the Hole in the Front of the Cylinder Head. (The Mounting Hole is just at the Lower Left of the Freeze-Out Plug in the Passenger Cylinder Head)
Step 5-Now you can Install the 1/2" Hoses on each side of the UPR compatible for Dodge Ram Catch Can. (Catch Can has a 1/2" Straight Barb Fitting for a Straight Shot to the Intake Manifold)
Step 6-Re-install your Air Intake Hose and Factory Engine Cover to Finish. (Now Double Check all your Work)
Compatible for Dodge Ram 1500 2500 3500 5.7L 6.4L HEMI (8 Speed Transmission) 2009-2019
Compatible for Dodge Charger, compatible for Dodge Challenger, compatible for Chrysler 300, for 6.4L SRT8
Specification
Hose: Heat / Oil / Petroleum / Goodyear HP 1/2 inch Hose
Filter: Unique Three Chamber Design
Catch Can Dimensions: 5 1/2" Tall x 2 1/2" Wide
Items Included:
-Billet catch can
-Allen wrench
-Z bracket
-1/2 inch Nickel fittings
-1/2 inch Goodyear HP Hose
Condition: 100% Brand New
Notice
-Please allow 2-3mm Measurement error
-If there are any questions, please feel free to contact us.
Installation Instructions
Step 1-Remove the factory or aftermarket air intake tube. (Removing 2 hose clamps and 1 sensor plug)
Step 2-Remove the factory engine cover by lifting the front and pulling towards you. (Hose Cut-Out n Rear Alignment Pins on Intake Cover)
Step 3-Remove the PCV Hose from the Throttle Body and Top of Intake Manifold (Remove the 2 rubber ends on each side for a much cleaner install than the 2 Adapter Barbed Fittings)
Step 4-Install compatible for Dodge Ram Catch Can in the Hole in the Front of the Cylinder Head. (The Mounting Hole is just at the Lower Left of the Freeze-Out Plug in the Passenger Cylinder Head)
Step 5-Now you can Install the 1/2" Hoses on each side of the UPR compatible for Dodge Ram Catch Can. (Catch Can has a 1/2" Straight Barb Fitting for a Straight Shot to the Intake Manifold)
Step 6-Re-install your Air Intake Hose and Factory Engine Cover to Finish. (Now Double Check all your Work)